PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FCC-24-3
FCC-24-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYVINYL LOCATION NOT OTHERWISE SPECIFIED, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 4.000 INCHES NOMINAL IN, style_designator: STRAIGHT ARCH, inside_diameter/arch_length: 3.000 INCHES MINIMUM AND 3.020 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-037-1368, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FCC-24-3
NSN: 5340-01-037-1368
FSC: 5340
CAGE: 06915 — RICHCO INC (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL LOCATION NOT OTHERWISE SPECIFIED
overall_width0.500 INCHES NOMINAL IN
overall_length4.000 INCHES NOMINAL IN
style_designatorSTRAIGHT ARCH
inside_diameter/arch_length3.000 INCHES MINIMUM AND 3.020 INCHES MAXIMUM IN
NSN5340-01-037-1368
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FCC-24-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYVINYL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: STRAIGHT ARCH
•
INSIDE DIAMETER/ARCH LENGTH: 3.000 INCHES MINIMUM AND 3.020 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH4.000 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORSTRAIGHT ARCH
INSIDE DIAMETER/ARCH LENGTH3.000 INCHES MINIMUM AND 3.020 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
101526Interchangeable
interchangeable cross-reference
interchangeable
100-3094Interchangeable
interchangeable cross-reference
interchangeable
2GE539Interchangeable
interchangeable cross-reference
interchangeable
10030Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FCC-24-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FCC-24-3?
FCC-24-3 is a STRAP,RETAINING.
What parts can replace FCC-24-3?
There are 4 known substitutes for FCC-24-3: 101526, 100-3094, 2GE539 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FCC-24-3?
FCC-24-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-037-1368. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FCC-24-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026