PartsTable
Technical Data Sheet
Download PDF

FC250 — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

FC250: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: PLASTIC VINYL, design_type: FRICTION, overall_diameter: 3.308 INCHES NOMINAL IN, inside_diameter_length: 0.344 INCHES NOMINAL IN, criticality_code_justification: FEAT, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-909-0946, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ FC250
NSN: 5340-00-909-0946
NIINs: 009090946, 011626185, 015640528
FSC: 5340 — Hardware, Commercial
CAGE: 15819 — SINCLAIR & RUSH, INC. DBA SINCLAIR & RUSH INC (USA)
SPECIFICATIONS
materialPLASTIC VINYL
design_typeFRICTION
overall_diameter3.308 INCHES NOMINAL IN
special_featuresTHE ITEM IS A NON-AVIATION CRITICAL SAFETY ITEM WHOSE FAILURE WILL RES ULT IN SERIOUS DAMAGE TO EQUIPMENTS OR SERIOUS INJURY OR DEATH TO PERSONNEL
inside_diameter_length0.344 INCHES NOMINAL IN
criticality_code_justificationFEAT
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed2.500 INCHES NOMINAL IN
NSN5340-00-909-0946
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FC250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 3.308 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 2.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC VINYL
•
INSIDE DIAMETER LENGTH: 0.344 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER3.308 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED2.500 INCHES NOMINAL IN
MATERIALPLASTIC VINYL
INSIDE DIAMETER LENGTH0.344 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 4
194-505-9004Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3-25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10117497Reference document
Same NSN cross-reference
Reference document — Informative reference only
26226203-04Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FC250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FC250?
FC250 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace FC250?
There are 4 known substitutes for FC250: 194-505-9004, 3-25, 10117497 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FC250?
FC250 is cataloged in the U.S. Government catalog under NSN 5340-00-909-0946. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FC250