PartsTable
Technical Data Sheet
Download PDF

FC18800 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FC18800: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, height: 0.250 INCHES NOMINAL IN, length: 1.375 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.328 INCHES NOMINAL IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-610-3338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FC18800
NSN: 5340-00-610-3338
FSC: 5340 — Hardware, Commercial
CAGE: 63477 — FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
height0.250 INCHES NOMINAL IN
length1.375 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.328 INCHES NOMINAL IN
furnished_itemsLOCKNUT
surface_treatmentZINC OR ZINC AND CHROMATE OR ZINC AND PHOSPHATE
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationQQ-Z-325 FED SPEC ALL TREATMENT RESPONSES
NSN5340-00-610-3338
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FC18800 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.375 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325 FED SPEC ALL TREATMENT RESPONSES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OR ZINC AND CHROMATE OR ZINC AND PHOSPHATE
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS
LENGTH1.375 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325 FED SPEC ALL TREATMENT RESPONSES
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
HEIGHT0.250 INCHES NOMINAL IN
SURFACE TREATMENTZINC OR ZINC AND CHROMATE OR ZINC AND PHOSPHATE
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.328 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
F18800Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FC18800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FC18800?
FC18800 is a CLAMP,SYNCHRO.
What parts can replace FC18800?
There is 1 known substitute for FC18800: F18800. Substitute compatibility should be verified for your specific system.
What is the NSN for FC18800?
FC18800 is cataloged in the U.S. Government catalog under NSN 5340-00-610-3338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FC18800