FC14774 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

FC14774: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.4355 INCHES MINIMUM AND 0.4395 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_length: 2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM IN, undercut_width: 0.156 INCHES NOMINAL IN, first_end_style: CHAMFERED, undercut_radius: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-740-9379, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FC14774

NSN: 5315-00-740-9379
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 63477 — FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV (USA)

SPECIFICATIONS

diameter	0.4355 INCHES MINIMUM AND 0.4395 INCHES MAXIMUM IN
material	STEEL OVERALL
overall_length	2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM IN
undercut_width	0.156 INCHES NOMINAL IN
first_end_style	CHAMFERED
undercut_radius	0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
effective_length	1.438 INCHES NOMINAL IN
style_designator	GROOVE
undercut_diameter	0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
first_end_location	BOTH ENDS
first_hole_diameter	0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
second_hole_diameter	0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
NSN	5315-00-740-9379

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.156 INCHES NOMINAL IN

•

FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN

•

FIRST END LOCATION: BOTH ENDS

•

HOLE ARRANGEMENT STYLE: BOTH END DRILLED

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: GROOVE

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.156 INCHES NOMINAL IN
FIRST END TAPER LENGTH	0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
FIRST END LOCATION	BOTH ENDS
HOLE ARRANGEMENT STYLE	BOTH END DRILLED
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
STYLE DESIGNATOR	GROOVE
DIAMETER	0.4355 INCHES MINIMUM AND 0.4395 INCHES MAXIMUM IN
OVERALL LENGTH	2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 6

7409379Reference document

Same NSN cross-reference

Reference document — Secondary reference

7-12-26Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

1746H8Reference document

Same NSN cross-reference

Reference document — Secondary reference

KC5162Reference document

Same NSN cross-reference

Reference document — Secondary reference

1746H8ZSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5315007409379Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy FC14774?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FC14774?

FC14774 is a PIN,GROOVED,HEADLESS.

What parts can replace FC14774?

There are 6 known substitutes for FC14774: 7409379, 7-12-26, 1746H8 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for FC14774?

FC14774 is cataloged in the U.S. Government catalog under NSN 5315-00-740-9379. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FC14774 — PIN,GROOVED,HEADLESS

Request a Quote — FC14774