PartsTable
Technical Data Sheet
Download PDF

FBS394G6 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FBS394G6: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.312 INCHES NOMINAL IN, material: STEEL OVERALL, overall_length: 0.683 INCHES NOMINAL IN, first_end_style: POINTED, second_end_style: SQUARE, style_designator: CIRCULAR GROOVE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-468-7444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FBS394G6
NSN: 5315-00-468-7444
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: K0378 — ROLLS-ROYCE PLC DIV DEFENSE (EUROPE) (GBR)
SPECIFICATIONS
diameter0.312 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_length0.683 INCHES NOMINAL IN
first_end_stylePOINTED
second_end_styleSQUARE
style_designatorCIRCULAR GROOVE
first_end_locationPOINTED END
first_end_taper_angle60.0 DEGREES NOMINAL
first_end_taper_length0.093 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-468-7444
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FBS394G6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.093 INCHES NOMINAL IN
•
FIRST END LOCATION: POINTED END
•
FIRST END STYLE: POINTED
•
STYLE DESIGNATOR: CIRCULAR GROOVE
•
DIAMETER: 0.312 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 60.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.093 INCHES NOMINAL IN
FIRST END LOCATIONPOINTED END
FIRST END STYLEPOINTED
STYLE DESIGNATORCIRCULAR GROOVE
DIAMETER0.312 INCHES NOMINAL IN
OVERALL LENGTH0.683 INCHES NOMINAL IN
FIRST END TAPER ANGLE60.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END STYLESQUARE
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
99-109-0594Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FBS394G6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FBS394G6?
FBS394G6 is a PIN,GROOVED,HEADLESS.
What parts can replace FBS394G6?
There is 1 known substitute for FBS394G6: 99-109-0594. Substitute compatibility should be verified for your specific system.
What is the NSN for FBS394G6?
FBS394G6 is cataloged in the U.S. Government catalog under NSN 5315-00-468-7444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FBS394G6