FAUSG118X1 — SHAFT,DRIVE,FLEXIBLE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

FAUSG118X1: SHAFT,DRIVE,FLEXIBLE.

The SHAFT,DRIVE,FLEXIBLE is a the manufacturer industrial component. Key specifications include end_type: ROUND FEMALE, material: NICKEL ALLOY SHAFT, unit_type: SOLID METAL, overall_length: 6.188 INCHES MINIMUM AND 6.312 INCHES MAXIMUM IN, size_designator: 0.500 IN. DIA FIRST END,0.437 IN.

DIA SECOND END IN, outside_diameter: 0.218 INCHES NOMINAL IN. This part is cataloged in the U.S. Government catalog under NSN 3040-01-164-7944, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FAUSG118X1

NSN: 3040-01-164-7944
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 0KZS2 — S.S. WHITE TECHNOLOGIES, INC. (USA)

SPECIFICATIONS

end_type	ROUND FEMALE
material	NICKEL ALLOY SHAFT
unit_type	SOLID METAL
overall_length	6.188 INCHES MINIMUM AND 6.312 INCHES MAXIMUM IN
size_designator	0.500 IN. DIA FIRST END,0.437 IN. DIA SECOND END IN
outside_diameter	0.218 INCHES NOMINAL IN
end_overall_length	0.840 INCHES NOMINAL IN
securing_hole_thread_size	3-32
cross_section_size_and_location	0.437 INCHES NOMINAL DIAMETER IN
threaded_securing_hole_location	LOCATED 90 DEG APART,0.130 IN. FROM END,THRU TO BORE IN
threaded_securing_hole_quantity	2
NSN	3040-01-164-7944

COMPONENT DIAGRAM

KEY FEATURES

•

THREADED SECURING HOLE LOCATION: LOCATED 90 DEG APART,0.130 IN. FROM END,THRU TO BORE IN

•

CROSS SECTION SIZE AND LOCATION: 0.500 INCHES NOMINAL DIAMETER IN

•

SIZE DESIGNATOR: 0.500 IN. DIA FIRST END,0.437 IN. DIA SECOND END IN

•

OUTSIDE DIAMETER: 0.218 INCHES NOMINAL IN

•

SECURING HOLE THREAD SIZE: 3-32

•

END OVERALL LENGTH: 0.840 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

THREADED SECURING HOLE LOCATION	LOCATED 90 DEG APART,0.130 IN. FROM END,THRU TO BORE IN
CROSS SECTION SIZE AND LOCATION	0.500 INCHES NOMINAL DIAMETER IN
CROSS SECTION SIZE AND LOCATION	0.437 INCHES NOMINAL DIAMETER IN
SIZE DESIGNATOR	0.500 IN. DIA FIRST END,0.437 IN. DIA SECOND END IN
OVERALL LENGTH	6.188 INCHES MINIMUM AND 6.312 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.218 INCHES NOMINAL IN
SECURING HOLE THREAD SIZE	3-32
END OVERALL LENGTH	0.840 INCHES NOMINAL IN
END OVERALL LENGTH	0.560 INCHES NOMINAL IN
UNIT TYPE	SOLID METAL

SUBSTITUTES & CROSS-REFERENCES 2

7606-7050Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

7606-7050-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FAUSG118X1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FAUSG118X1?

FAUSG118X1 is a SHAFT,DRIVE,FLEXIBLE.

What parts can replace FAUSG118X1?

There are 2 known substitutes for FAUSG118X1: 7606-7050, 7606-7050-2. Substitute compatibility should be verified for your specific system.

What is the NSN for FAUSG118X1?

FAUSG118X1 is cataloged in the U.S. Government catalog under NSN 3040-01-164-7944. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FAUSG118X1 — SHAFT,DRIVE,FLEXIBLE

Request a Quote — FAUSG118X1