PartsTable
Technical Data Sheet
Download PDF

FAN22C — CLOSER,DOOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FAN22C: CLOSER,DOOR.

The CLOSER,DOOR is a the manufacturer industrial component. Key specifications include material: STEEL ARM, unit_type: SINGLE ACTION, control_type: LIQUID AND SPRING, special_features: 26.320 IN. O/A LG,ENTENDED;16.080 IN.

COMPRESSED;PI IS 75 LBS,NOM. FORCE LBS, fsc_application_data: MINI MUTES, operational_direction: LEFT-HAND OR RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-332-0628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FAN22C
NSN: 5340-01-332-0628
FSC: 5340 — Hardware, Commercial
CAGE: 55787 — STABILUS (USA)
SPECIFICATIONS
materialSTEEL ARM
unit_typeSINGLE ACTION
control_typeLIQUID AND SPRING
special_features26.320 IN. O/A LG,ENTENDED;16.080 IN. COMPRESSED;PI IS 75 LBS,NOM. FORCE LBS
fsc_application_dataMINI MUTES
operational_directionLEFT-HAND OR RIGHT-HAND
end_item_identificationAN/MST-T1(V)
mounting_type_for_which_designedDOOR/FRAME MORTISE
NSN5340-01-332-0628
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FAN22C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: LEFT-HAND OR RIGHT-HAND
•
FSC APPLICATION DATA: MINI MUTES
•
CONTROL TYPE: LIQUID AND SPRING
•
UNIT TYPE: SINGLE ACTION
•
MOUNTING TYPE FOR WHICH DESIGNED: DOOR/FRAME MORTISE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONLEFT-HAND OR RIGHT-HAND
FSC APPLICATION DATAMINI MUTES
CONTROL TYPELIQUID AND SPRING
UNIT TYPESINGLE ACTION
SPECIAL FEATURES26.320 IN. O/A LG,ENTENDED;16.080 IN. COMPRESSED;PI IS 75 LBS,NOM. FORCE LBS
MOUNTING TYPE FOR WHICH DESIGNEDDOOR/FRAME MORTISE
END ITEM IDENTIFICATIONAN/MST-T1(V)
MATERIALSTEEL CASE
MATERIALSTEEL ARM
SUBSTITUTES & CROSS-REFERENCES 3
C11918-3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
FAN22C-070Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C11918Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FAN22C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FAN22C?
FAN22C is a CLOSER,DOOR.
What parts can replace FAN22C?
There are 3 known substitutes for FAN22C: C11918-3, FAN22C-070, C11918. Substitute compatibility should be verified for your specific system.
What is the NSN for FAN22C?
FAN22C is cataloged in the U.S. Government catalog under NSN 5340-01-332-0628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FAN22C