PartsTable
Technical Data Sheet
Download PDF

FAL22C — CLOSER,DOOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FAL22C: CLOSER,DOOR.

The CLOSER,DOOR is a the manufacturer industrial component. Key specifications include material: STEEL ARM, unit_type: SINGLE ACTION, control_type: LIQUID AND SPRING, special_features: 26.320 IN. O/A LG,EXTENDED;26.100 IN.

O/A LG,LOCKING POSITION;75 LBS FORCE SPEC. LBS, fsc_application_data: MINI MUTES, operational_direction: LEFT-HAND OR RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-332-0629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FAL22C
NSN: 5340-01-332-0629
FSC: 5340 — Hardware, Commercial
CAGE: 55787 — STABILUS (USA)
SPECIFICATIONS
materialSTEEL ARM
unit_typeSINGLE ACTION
control_typeLIQUID AND SPRING
special_features26.320 IN. O/A LG,EXTENDED;26.100 IN. O/A LG,LOCKING POSITION;75 LBS FORCE SPEC. LBS
fsc_application_dataMINI MUTES
operational_directionLEFT-HAND OR RIGHT-HAND
mounting_type_for_which_designedDOOR/FRAME MORTISE
NSN5340-01-332-0629
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FAL22C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: LEFT-HAND OR RIGHT-HAND
•
FSC APPLICATION DATA: MINI MUTES
•
CONTROL TYPE: LIQUID AND SPRING
•
UNIT TYPE: SINGLE ACTION
•
MOUNTING TYPE FOR WHICH DESIGNED: DOOR/FRAME MORTISE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONLEFT-HAND OR RIGHT-HAND
FSC APPLICATION DATAMINI MUTES
CONTROL TYPELIQUID AND SPRING
UNIT TYPESINGLE ACTION
SPECIAL FEATURES26.320 IN. O/A LG,EXTENDED;26.100 IN. O/A LG,LOCKING POSITION;75 LBS FORCE SPEC. LBS
MOUNTING TYPE FOR WHICH DESIGNEDDOOR/FRAME MORTISE
MATERIALSTEEL CASE
MATERIALSTEEL ARM
SUBSTITUTES & CROSS-REFERENCES 3
C11918-4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
FAL22C-070Reference document
Same NSN cross-reference
Reference document — Secondary reference
C11918Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FAL22C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FAL22C?
FAL22C is a CLOSER,DOOR.
What parts can replace FAL22C?
There are 3 known substitutes for FAL22C: C11918-4, FAL22C-070, C11918. Substitute compatibility should be verified for your specific system.
What is the NSN for FAL22C?
FAL22C is cataloged in the U.S. Government catalog under NSN 5340-01-332-0629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FAL22C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.