PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FA2138GGG0340
FA2138GGG0340 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, exterior_color: BLACK, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-195-9125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FA2138GGG0340
NSN: 4720-01-195-9125
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
exterior_colorBLACK
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.844 INCHES NOMINAL IN
special_featuresPROTECTIVE CLOSURES REQUIRED
thread_directionRIGHT-HAND FIRST END
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-195-9125
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: FA2138GGG0340 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 0.844 INCHES NOMINAL IN
•
BURST TEST PRESSURE: 16000.0 POUNDS PER SQUARE INCH LBS
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
THREAD CLASS: 2B FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER0.844 INCHES NOMINAL IN
BURST TEST PRESSURE16000.0 POUNDS PER SQUARE INCH LBS
END CONNECTION DESIGNSTRAIGHT FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
THREAD CLASS2B FIRST END
CONNECTION STYLESWIVEL NUT FLARE FIRST END
INSIDE DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
956857Interchangeable
interchangeable cross-reference
interchangeable
W368Interchangeable
interchangeable cross-reference
interchangeable
3201XR1AInterchangeable
interchangeable cross-reference
interchangeable
A2660Interchangeable
interchangeable cross-reference
interchangeable
A2660-7Interchangeable
interchangeable cross-reference
interchangeable
FG1199EEE0306Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FA2138GGG0340?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FA2138GGG0340?
FA2138GGG0340 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace FA2138GGG0340?
There are 24 known substitutes for FA2138GGG0340: 956857, W368, 3201XR1A and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FA2138GGG0340?
FA2138GGG0340 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-195-9125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FA2138GGG0340

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026