PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F8X1
F8X1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CASE,ELECTRONIC COMMUNICATIONS E. Key specifications include material: GLASS, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, flange_length: 0.160 INCHES NOMINAL IN, open_end_type: FLANGED, overall_width: 0.2500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F8X1
NSN: 3110-00-108-9342
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialGLASS
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
flange_length0.160 INCHES NOMINAL IN
open_end_typeFLANGED
overall_width0.2500 INCHES NOMINAL IN
load_directionRADIAL
overall_length2.190 INCHES NOMINAL IN
surface_finishGROUND
closed_end_holeNOT INCLUDED
inside_diameter0.938 INCHES NOMINAL IN
closed_end_shapeCONCAVE
NSN3110-00-108-9342
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F8X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OVERALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL WIDTH0.2500 INCHES NOMINAL IN
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
149-468Interchangeable
interchangeable cross-reference
interchangeable
ART2096Interchangeable
interchangeable cross-reference
interchangeable
5902Interchangeable
interchangeable cross-reference
interchangeable
F8Interchangeable
interchangeable cross-reference
interchangeable
8Interchangeable
interchangeable cross-reference
interchangeable
19003BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F8X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F8X1?
F8X1 is a CASE,ELECTRONIC COMMUNICATIONS E.
What parts can replace F8X1?
There are 14 known substitutes for F8X1: 149-468, ART2096, 5902 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F8X1?
F8X1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F8X1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026