PartsTable
Technical Data Sheet
Download PDF

F811 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

F811: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5935-00-259-3318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ F811
NSN: 5935-00-259-3318
NIINs: 002593318, 006465958
FSC: 5935 — Connectors, Electrical
CAGE: 95354 — METHODE ELECTRONICS INC DIV POWER SOLUTIONS GROUP (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
overall_width0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
terminal_typeSOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
overall_height0.932 INCHES MINIMUM AND 0.942 INCHES MAXIMUM IN
overall_length1.062 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
shaft_diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
insert_materialPLASTIC PHENOLIC SINGLE MATING END
NSN5935-00-259-3318
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN F811 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
CONTACT MAXIMUM CURRENT RATING IN AMPS: 15.0 SINGLE MATING END FIRST CONTACT GROUPING
•
BODY STYLE: STRAIGHT SHAPE, RECTANGULAR
•
TERMINAL TYPE: SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
•
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
•
MATING END QUANTITY: 1
•
PRECIOUS MATERIAL: GOLD AND SILVER
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.932 INCHES MINIMUM AND 0.942 INCHES MAXIMUM IN
CONTACT MAXIMUM CURRENT RATING IN AMPS15.0 SINGLE MATING END FIRST CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS5.0 SINGLE MATING END SECOND CONTACT GROUPING
BODY STYLESTRAIGHT SHAPE, RECTANGULAR
TERMINAL TYPESOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
MATING END QUANTITY1
PRECIOUS MATERIALGOLD AND SILVER
UNTHREADED MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL IN
INSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14,TYPE MFE MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
SUBSTITUTES & CROSS-REFERENCES 7
4610015551Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1199900151Reference document
Same NSN cross-reference
Reference document — Secondary reference
126-805-1000Reference document
Same NSN cross-reference
Reference document — Secondary reference
372-1076-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
126-805Reference document
Same NSN cross-reference
Reference document — Secondary reference
26-805Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy F811?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F811?
F811 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace F811?
There are 7 known substitutes for F811: 4610015551, 1199900151, 126-805-1000 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F811?
F811 is cataloged in the U.S. Government catalog under NSN 5935-00-259-3318. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F811

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.