PartsTable
Technical Data Sheet
Download PDF

F8035-000148 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

F8035-000148: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.508 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES ALL SURFACES, hardness_rating: 0.25 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM, outside_diameter: 0.742 INCHES NOMINAL IN, style_designator: RECESSED BOTH SIDES. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-475-9652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F8035-000148
NSN: 5310-01-475-9652
FSC: 5310 — Nuts and Washers
CAGE: A196N — FORSVARETS MATERIELVERK (SWE)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.508 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES ALL SURFACES
hardness_rating0.25 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
outside_diameter0.742 INCHES NOMINAL IN
style_designatorRECESSED BOTH SIDES
top_recess_angle120.0 DEGREES NOMINAL
surface_treatmentOXIDE OVERALL
material_thickness0.100 INCHES NOMINAL IN
bottom_recess_angle60.0 DEGREES NOMINAL
top_recess_diameter0.692 INCHES NOMINAL IN
bottom_recess_diameter0.512 INCHES NOMINAL IN
NSN5310-01-475-9652
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F8035-000148 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES ALL SURFACES
•
TOP RECESS DIAMETER: 0.692 INCHES NOMINAL IN
•
BOTTOM RECESS DIAMETER: 0.512 INCHES NOMINAL IN
•
HARDNESS RATING: 0.25 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
•
TOP RECESS ANGLE: 120.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: RECESSED BOTH SIDES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A564,17-4,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.742 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES ALL SURFACES
TOP RECESS DIAMETER0.692 INCHES NOMINAL IN
BOTTOM RECESS DIAMETER0.512 INCHES NOMINAL IN
HARDNESS RATING0.25 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
TOP RECESS ANGLE120.0 DEGREES NOMINAL
STYLE DESIGNATORRECESSED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A564,17-4,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.742 INCHES NOMINAL IN
MATERIAL THICKNESS0.100 INCHES NOMINAL IN
BOTTOM RECESS ANGLE60.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 2
711419708307Reference document
Same NSN cross-reference
Reference document — Secondary reference
12991533Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — critical (Q)
Ready to buy F8035-000148?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F8035-000148?
F8035-000148 is a WASHER,RECESSED.
What parts can replace F8035-000148?
There are 2 known substitutes for F8035-000148: 711419708307, 12991533. Substitute compatibility should be verified for your specific system.
What is the NSN for F8035-000148?
F8035-000148 is cataloged in the U.S. Government catalog under NSN 5310-01-475-9652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F8035-000148

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.