F7500HS-10-C-5 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

F7500HS-10-C-5: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING FASTENER, head_style: KNURLED NO. 5, head_height: 0.360 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.451 INCHES NOMINAL IN, fastener_length: 1.067 INCHES MINIMUM AND 1.097 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-376-4768, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

F7500HS-10-C-5

NSN: 5305-01-376-4768
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING FASTENER
head_style	KNURLED NO. 5
head_height	0.360 INCHES NOMINAL IN
thread_class	3A A
head_diameter	0.451 INCHES NOMINAL IN
fastener_length	1.067 INCHES MINIMUM AND 1.097 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	ANODIZE HEAD
width_across_flats	0.156 INCHES NOMINAL IN
internal_drive_style	HEXAGON
nominal_thread_diameter	0.190 INCHES IN
thread_quantity_per_inch	32
NSN	5305-01-376-4768

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.360 INCHES NOMINAL IN

•

FASTENER LENGTH: 1.067 INCHES MINIMUM AND 1.097 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.156 INCHES NOMINAL IN
HEAD HEIGHT	0.360 INCHES NOMINAL IN
FASTENER LENGTH	1.067 INCHES MINIMUM AND 1.097 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
MATERIAL ACCOMMODATED THICKNESS	0.094 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 3

C003252-03Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

C00325-03Reference document

Same NSN cross-reference

Reference document — Secondary reference

FT1023HS-10-3-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy F7500HS-10-C-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is F7500HS-10-C-5?

F7500HS-10-C-5 is a SCREW ASSEMBLY,PANEL.

What parts can replace F7500HS-10-C-5?

There are 3 known substitutes for F7500HS-10-C-5: C003252-03, C00325-03, FT1023HS-10-3-5. Substitute compatibility should be verified for your specific system.

What is the NSN for F7500HS-10-C-5?

F7500HS-10-C-5 is cataloged in the U.S. Government catalog under NSN 5305-01-376-4768. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

F7500HS-10-C-5 — SCREW ASSEMBLY,PANEL

Request a Quote — F7500HS-10-C-5