PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F6N4-562-0
F6N4-562-0 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC ETHYL CELLULOSE OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-421-9892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F6N4-562-0
NSN: 5340-00-421-9892
FSC: 5340
CAGE: 65664 — CATAMOUNT MFG INC (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC ETHYL CELLULOSE OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.438 INCHES NOMINAL IN
material_document_and_classificationMIL-P-46074 TY 1 GR H2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.842 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.623 INCHES NOMINAL IN
NSN5340-00-421-9892
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F6N4-562-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
MATERIAL: PLASTIC ETHYL CELLULOSE OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-46074 TY 1 GR H2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.623 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.842 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
MATERIALPLASTIC ETHYL CELLULOSE OVERALL
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-46074 TY 1 GR H2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.623 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.842 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.438 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
1305334H1Interchangeable
interchangeable cross-reference
interchangeable
T-9166Interchangeable
interchangeable cross-reference
interchangeable
MFM05-5008Interchangeable
interchangeable cross-reference
interchangeable
9166BInterchangeable
interchangeable cross-reference
interchangeable
KA59-161Interchangeable
interchangeable cross-reference
interchangeable
8041-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F6N4-562-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F6N4-562-0?
F6N4-562-0 is a CLAMP,LOOP.
What parts can replace F6N4-562-0?
There are 8 known substitutes for F6N4-562-0: 1305334H1, T-9166, MFM05-5008 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F6N4-562-0?
F6N4-562-0 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-421-9892. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F6N4-562-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026