PartsTable
Technical Data Sheet
Download PDF

F55 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

F55: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OR PAPER FILTERING MEDIUM, nut_style: HEXAGON, nut_height: 0.375 INCHES NOMINAL IN, stud_length: 2.5000 INCHES NOMINAL IN, thread_class: 3B, stud_diameter: 1.0000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-157-0516, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F55
NSN: 3110-00-157-0516
NIINs: 001570516, 002750816, 004260543, 015936443
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
materialSTEEL OR PAPER FILTERING MEDIUM
nut_styleHEXAGON
nut_height0.375 INCHES NOMINAL IN
stud_length2.5000 INCHES NOMINAL IN
thread_class3B
stud_diameter1.0000 INCHES NOMINAL IN
thread_length1.2500 INCHES NOMINAL IN
thread_seriesUNF
end_similarityNOT IDENTICAL
overall_length5.625 INCHES NOMINAL IN
first_end_styleUNTHREADED CROSS DRILLED
outer_ring_width1.5000 INCHES NOMINAL IN
NSN3110-00-157-0516
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F55 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 1.5000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 2.7500 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
STUD LENGTH: 2.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH1.5000 INCHES NOMINAL IN
THREAD LENGTH1.2500 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH4.0620 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.7500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.000 INCHES IN
STUD LENGTH2.5000 INCHES NOMINAL IN
SPECIAL FEATURESMEANS FOR RELUBRICATION
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 2
1481689Reference document
Same NSN cross-reference
Reference document — Secondary reference
CF2 3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy F55?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F55?
F55 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace F55?
There are 2 known substitutes for F55: 1481689, CF2 3-4. Substitute compatibility should be verified for your specific system.
What is the NSN for F55?
F55 is cataloged in the U.S. Government catalog under NSN 3110-00-157-0516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F55