PartsTable
Technical Data Sheet
Download PDF

F52A4763-048 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

F52A4763-048: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLATE, nut_height: 0.281 INCHES MAXIMUM IN, nut_length: 1.292 INCHES MAXIMUM IN, plate_width: 0.516 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-269-4617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F52A4763-048
NSN: 5310-01-269-4617
FSC: 5310 — Nuts and Washers
CAGE: 019L2 — ESNA, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLATE
nut_height0.281 INCHES MAXIMUM IN
nut_length1.292 INCHES MAXIMUM IN
plate_width0.516 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
plate_thickness0.024 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCHROMATE OVERALL
nominal_thread_size0.250 INCHES IN
supplementary_featuresORANGE DYKEM DYE DXX-323 APPLIED FOR IDENTIFICATION
NSN5310-01-269-4617
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F52A4763-048 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.024 INCHES NOMINAL IN
•
NUT LENGTH: 1.292 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.516 INCHES MAXIMUM IN
•
SUPPLEMENTARY FEATURES: ORANGE DYKEM DYE DXX-323 APPLIED FOR IDENTIFICATION
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.281 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.024 INCHES NOMINAL IN
NUT LENGTH1.292 INCHES MAXIMUM IN
THREAD SERIESUNF
PLATE WIDTH0.516 INCHES MAXIMUM IN
SUPPLEMENTARY FEATURESORANGE DYKEM DYE DXX-323 APPLIED FOR IDENTIFICATION
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.281 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE OVERALL
NUT STYLEPLATE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
F19771-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy F52A4763-048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F52A4763-048?
F52A4763-048 is a NUT,PLAIN,PLATE.
What parts can replace F52A4763-048?
There is 1 known substitute for F52A4763-048: F19771-4. Substitute compatibility should be verified for your specific system.
What is the NSN for F52A4763-048?
F52A4763-048 is cataloged in the U.S. Government catalog under NSN 5310-01-269-4617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F52A4763-048

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.