PartsTable
Technical Data Sheet
Download PDF

F525-11172-14 — SHAFT,STRAIGHT

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

F525-11172-14: SHAFT,STRAIGHT.

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303SE OR STEEL COMP 303, end_similarity: NOT IDENTICAL, overall_length: 14.500 INCHES NOMINAL IN, first_end_style: PLAIN, second_end_style: UNTHREADED CROSS DRILLED, first_end_diameter: 0.7500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3040-01-398-9955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F525-11172-14
NSN: 3040-01-398-9955
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 303SE OR STEEL COMP 303
end_similarityNOT IDENTICAL
overall_length14.500 INCHES NOMINAL IN
first_end_stylePLAIN
second_end_styleUNTHREADED CROSS DRILLED
first_end_diameter0.7500 INCHES NOMINAL IN
second_end_diameter0.7500 INCHES NOMINAL IN
second_end_hole_diameter0.2500 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM IN
second_end_distance_from_hole_center_to_end1.530 INCHES NOMINAL IN
NSN3040-01-398-9955
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SHAFT,STRAIGHT TITLE COMPONENT PN F525-11172-14 MFR SHAFT,STRAIGHT
KEY FEATURES
•
SECOND END HOLE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM IN
•
FIRST END DIAMETER: 0.7500 INCHES NOMINAL IN
•
SECOND END DIAMETER: 0.7500 INCHES NOMINAL IN
•
FIRST END STYLE: PLAIN
•
SECOND END DISTANCE FROM HOLE CENTER TO END: 1.530 INCHES NOMINAL IN
•
END SIMILARITY: NOT IDENTICAL
•
SECOND END STYLE: UNTHREADED CROSS DRILLED
TECHNICAL CHARACTERISTICS
SECOND END HOLE DIAMETER0.2500 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM IN
FIRST END DIAMETER0.7500 INCHES NOMINAL IN
SECOND END DIAMETER0.7500 INCHES NOMINAL IN
FIRST END STYLEPLAIN
OVERALL LENGTH14.500 INCHES NOMINAL IN
SECOND END DISTANCE FROM HOLE CENTER TO END1.530 INCHES NOMINAL IN
END SIMILARITYNOT IDENTICAL
SECOND END STYLEUNTHREADED CROSS DRILLED
MATERIALSTEEL COMP 303SE OR STEEL COMP 303
SUBSTITUTES & CROSS-REFERENCES 1
F525-11172Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy F525-11172-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F525-11172-14?
F525-11172-14 is a SHAFT,STRAIGHT.
What parts can replace F525-11172-14?
There is 1 known substitute for F525-11172-14: F525-11172. Substitute compatibility should be verified for your specific system.
What is the NSN for F525-11172-14?
F525-11172-14 is cataloged in the U.S. Government catalog under NSN 3040-01-398-9955. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F525-11172-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.