PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F50-512-2
F50-512-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR-BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-616-4547, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F50-512-2
NSN: 5340-00-616-4547
FSC: 5340
CAGE: 18873 — DU PONT E I DE NEMOURS AND CO INC SECURITY DIRECTOR/LEGAL DEPT (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR-BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.188 INCHES NOMINAL IN
material_document_and_classificationF-10001,FSCM 31708 MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.529 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.373 INCHES NOMINAL IN
NSN5340-00-616-4547
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F50-512-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DIAMETER: 0.167 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.373 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: F-10001,FSCM 31708 MFR REF SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DIAMETER0.167 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.188 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.373 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONF-10001,FSCM 31708 MFR REF SINGLE MATERIAL RESPONSE BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.529 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
PP2SS10Upgraded Successor
successor cross-reference
successor
PP2Upgraded Successor
successor cross-reference
successor
PP2SUpgraded Successor
successor cross-reference
successor
5-16 6Upgraded Successor
successor cross-reference
successor
1JA7562H10Upgraded Successor
successor cross-reference
successor
CLN3-16Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F50-512-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F50-512-2?
F50-512-2 is a CLAMP,LOOP.
What parts can replace F50-512-2?
There are 23 known substitutes for F50-512-2: PP2SS10, PP2, PP2S and 20 more. Substitute compatibility should be verified for your specific system.
Is F50-512-2 still available?
F50-512-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F50-512-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026