PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F50-512-1
F50-512-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-049-9659, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F50-512-1
NSN: 5340-01-049-9659
FSC: 5340
CAGE: 72314 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
material_document_and_classificationMIL-N-18352 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.466 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.310 INCHES NOMINAL IN
NSN5340-01-049-9659
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F50-512-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.310 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.466 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-N-18352 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP INSIDE DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.310 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.466 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-N-18352 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SPECIAL FEATURESCOLOR BLACK
LOOP INSIDE DIAMETER0.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DIAMETER0.167 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
184Upgraded Successor
successor cross-reference
successor
A184Upgraded Successor
successor cross-reference
successor
2294339Upgraded Successor
successor cross-reference
successor
D-184AUpgraded Successor
successor cross-reference
successor
8955Upgraded Successor
successor cross-reference
successor
NAS1397P2EBUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F50-512-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F50-512-1?
F50-512-1 is a CLAMP,LOOP.
What parts can replace F50-512-1?
There are 17 known substitutes for F50-512-1: 184, A184, 2294339 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F50-512-1?
F50-512-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-049-9659. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F50-512-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026