PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F4X1
F4X1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1970 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9336, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F4X1
NSN: 3110-00-108-9336
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1970 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.6250 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-108-9336
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F4X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
BORE SHAPE: STRAIGHT
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH0.1970 INCHES NOMINAL IN
SURFACE FINISHGROUND
MATERIALSTEEL OVERALL
BORE SHAPESTRAIGHT
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER0.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
A509517-3Interchangeable
interchangeable cross-reference
interchangeable
MSC115A/10HJ4Interchangeable
interchangeable cross-reference
interchangeable
1066620-1Interchangeable
interchangeable cross-reference
interchangeable
F4Interchangeable
interchangeable cross-reference
interchangeable
1000R59Interchangeable
interchangeable cross-reference
interchangeable
T4935021-23Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F4X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F4X1?
F4X1 is a BEARING,BALL,ANNULAR.
What parts can replace F4X1?
There are 26 known substitutes for F4X1: A509517-3, MSC115A/10HJ4, 1066620-1 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F4X1?
F4X1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9336. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F4X1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026