PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F4NY-625BK
F4NY-625BK ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, material_thickness: 0.040 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-032-3805, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F4NY-625BK
NSN: 5340-00-032-3805
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
material_document_and_classificationMIL-N-18352 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.790 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.634 INCHES NOMINAL IN
NSN5340-00-032-3805
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F4NY-625BK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-N-18352 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.634 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DIAMETER: 0.167 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-N-18352 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.634 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DIAMETER0.167 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
SPECIAL FEATURESCOLOR BLACK
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.790 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
5-84Interchangeable
interchangeable cross-reference
interchangeable
70C44307C01Interchangeable
interchangeable cross-reference
interchangeable
105-155Interchangeable
interchangeable cross-reference
interchangeable
5051Interchangeable
interchangeable cross-reference
interchangeable
977-110Interchangeable
interchangeable cross-reference
interchangeable
76-150Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F4NY-625BK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F4NY-625BK?
F4NY-625BK is a CLAMP,LOOP.
What parts can replace F4NY-625BK?
There are 21 known substitutes for F4NY-625BK: 5-84, 70C44307C01, 105-155 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F4NY-625BK?
F4NY-625BK is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-032-3805. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F4NY-625BK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026