PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F4310606-6-6-6-122.00
F4310606-6-6-6-122.00 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The F4310606-6-6-6-122.00 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-317-8934, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F4310606-6-6-6-122.00
NSN: 4720-01-317-8934
FSC: 4720
CAGE: 9R376 — HYDRO-POWER INDUSTRIAL PRODUCTS INC (USA)
SPECIFICATIONS
Part NumberF4310606-6-6-6-122.00
NSN4720-01-317-8934
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: F4310606-6-6-6-122.00 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B FIRST END
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
BURST TEST PRESSURE: 12000.0 POUNDS PER SQUARE INCH LBS
•
MINIMUM INSIDE BENDING RADIUS: 2.500 INCHES IN
•
OUTSIDE DIAMETER: 0.620 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
INSIDE DIAMETER0.375 INCHES NOMINAL IN
BURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH LBS
MINIMUM INSIDE BENDING RADIUS2.500 INCHES IN
OUTSIDE DIAMETER0.620 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND FIRST END
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
SEAT ANGLE37.0 DEGREES FIRST END
NOMINAL THREAD SIZE0.562 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
175752Interchangeable
interchangeable cross-reference
interchangeable
10590Interchangeable
interchangeable cross-reference
interchangeable
SL4530PC10Interchangeable
interchangeable cross-reference
interchangeable
20726G009 REV AInterchangeable
interchangeable cross-reference
interchangeable
20726G001 REV K FN 8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F4310606-6-6-6-122.00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F4310606-6-6-6-122.00?
F4310606-6-6-6-122.00 is a F4310606-6-6-6-122.00.
What parts can replace F4310606-6-6-6-122.00?
There are 5 known substitutes for F4310606-6-6-6-122.00: 175752, 10590, SL4530PC10 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F4310606-6-6-6-122.00?
F4310606-6-6-6-122.00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-317-8934. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F4310606-6-6-6-122.00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026