PartsTable / COMPONENT / F400S205
F400S205
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, housing_bore_diameter: 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-6874, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
F400S205
NSN: 5330-00-364-6874 FSC: 5330 CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
material LEATHER SEALING ELEMENT case_style SQUARE seal_width 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN housing_bore_diameter 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.375 INCHES NOMINAL IN NSN 5330-00-364-6874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: F400S205
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT DIAMETER: 0.375 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER 0.375 INCHES NOMINAL IN HOUSING BORE DIAMETER 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR MATERIAL STEEL CASE MATERIAL LEATHER SEALING ELEMENT SEAL WIDTH 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
8818 Interchangeable interchangeable cross-reference
interchangeable
193067 Interchangeable interchangeable cross-reference
interchangeable
RC7158 Interchangeable interchangeable cross-reference
interchangeable
4912568-01 Interchangeable interchangeable cross-reference
interchangeable
D7171A Interchangeable interchangeable cross-reference
interchangeable
W185 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy F400S205?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F400S205?
F400S205 is a SEAL,PLAIN ENCASED.
What parts can replace F400S205?
There are 22 known substitutes for F400S205: 8818, 193067, RC7158 and 19 more. Substitute compatibility should be verified for your specific system.
Is F400S205 still available?
F400S205 is currently cancelled.
Request a Quote — F400S205