PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F3D10162-5
F3D10162-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.503 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN, center_hole_diameter: 1.331 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-029-9933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F3D10162-5
NSN: 5330-01-029-9933
FSC: 5330
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.503 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
center_hole_diameter1.331 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-029-9933
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F3D10162-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CUT TYPE: DIAGONAL OVERALL
•
CENTER HOLE DIAMETER: 1.331 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
JOINT TYPESCARF-PERIPHERAL OVERALL
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CUT TYPEDIAGONAL OVERALL
CENTER HOLE DIAMETER1.331 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER1.503 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
5330PL0799358Interchangeable
interchangeable cross-reference
interchangeable
10119535Interchangeable
interchangeable cross-reference
interchangeable
MS28774-125Interchangeable
interchangeable cross-reference
interchangeable
54360Interchangeable
interchangeable cross-reference
interchangeable
V3D10043 PIECE 17Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS8791Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F3D10162-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F3D10162-5?
F3D10162-5 is a RETAINER,PACKING.
What parts can replace F3D10162-5?
There are 11 known substitutes for F3D10162-5: 5330PL0799358, 10119535, MS28774-125 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F3D10162-5?
F3D10162-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-029-9933. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F3D10162-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026