F315P103BM150MM1 — FILTER,FLUID

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

F315P103BM150MM1: FILTER,FLUID.

The FILTER,FLUID is a the manufacturer industrial component. Key specifications include material: STEEL FILTERING MEDIUM, body_height: 7.078 INCHES NOMINAL IN, body_length: 4.109 INCHES NOMINAL IN, design_type: REUSABLE, mounting_type: UNTHREADED HOLE HEAD SIDE, style_designator: STRAIGHT FLOW BASKET STRAINER W/BOLTED COVER. This part is cataloged in the U.S.

Government catalog under NSN 4330-01-305-5865, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

F315P103BM150MM1

NSN: 4330-01-305-5865
FSC: 4330 — Centrifugals, Separators, and Pressure and Vacuum Filters
CAGE: 05779 — PARKER-HANNIFIN CORPORATION DBA HYDRAULIC FILTER DIVISION DIV HYDRAULIC & FUEL FILTER DIVISION (USA)

SPECIFICATIONS

material	STEEL FILTERING MEDIUM
body_height	7.078 INCHES NOMINAL IN
body_length	4.109 INCHES NOMINAL IN
design_type	REUSABLE
mounting_type	UNTHREADED HOLE HEAD SIDE
style_designator	STRAIGHT FLOW BASKET STRAINER W/BOLTED COVER
operating_pressure	5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
mounting_hole_diameter	0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
mounting_hole_quantity	2
media_for_which_designed	FUEL/OIL, HYDROCARBON
filtering_element_quantity	1
filtration_rating_in_microns	3.0 ABSOLUTE
NSN	4330-01-305-5865

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING HOLE QUANTITY: 2

•

FILTRATION RATING IN MICRONS: 3.0 ABSOLUTE

•

DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET: 5.750 INCHES NOMINAL IN

•

DESIGN TYPE: REUSABLE

•

BODY HEIGHT: 7.078 INCHES NOMINAL IN

•

STYLE DESIGNATOR: STRAIGHT FLOW BASKET STRAINER W/BOLTED COVER

•

MOUNTING HOLE DIAMETER: 0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN

•

OPERATING PRESSURE: 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS

TECHNICAL CHARACTERISTICS

MOUNTING HOLE QUANTITY	2
FILTRATION RATING IN MICRONS	3.0 ABSOLUTE
DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET	5.750 INCHES NOMINAL IN
DESIGN TYPE	REUSABLE
BODY HEIGHT	7.078 INCHES NOMINAL IN
STYLE DESIGNATOR	STRAIGHT FLOW BASKET STRAINER W/BOLTED COVER
MOUNTING HOLE DIAMETER	0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
OPERATING PRESSURE	5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
FILTERING ELEMENT QUANTITY	1
BODY LENGTH	4.109 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 1

AZ9999A124PRLPReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy F315P103BM150MM1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is F315P103BM150MM1?

F315P103BM150MM1 is a FILTER,FLUID.

What parts can replace F315P103BM150MM1?

There is 1 known substitute for F315P103BM150MM1: AZ9999A124PRLP. Substitute compatibility should be verified for your specific system.

What is the NSN for F315P103BM150MM1?

F315P103BM150MM1 is cataloged in the U.S. Government catalog under NSN 4330-01-305-5865. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

F315P103BM150MM1 — FILTER,FLUID

Request a Quote — F315P103BM150MM1