The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-386-3346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
F3010643-8-8-8-30
NSN:4720-01-386-3346 FSC:4720 — Hose and Flexible Tubing CAGE:87373 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HOSE PRODUCTS DIVISION (USA)
SPECIFICATIONS
flow_angle
90.0 DEGREES SECOND END
seat_angle
37.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
3B FIRST END
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.500 INCHES NOMINAL IN
connection_style
SWIVEL NUT FLARE FIRST END
outside_diameter
0.880 INCHES NOMINAL IN
special_features
INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
thread_direction
RIGHT-HAND FIRST END
operating_pressure
3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
14000.0 POUNDS PER SQUARE INCH LBS
NSN
4720-01-386-3346
COMPONENT DIAGRAM
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES FIRST END
•
MEASURING METHOD AND LENGTH: 30.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 7.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: ELBOW SECOND END
TECHNICAL CHARACTERISTICS
FLOW ANGLE
90.0 DEGREES FIRST END
FLOW ANGLE
90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH
30.000 INCHES NOMINAL OVERALL IN
TEMP RATING
-40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS
7.000 INCHES IN
CONNECTION STYLE
SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN
ELBOW SECOND END
END CONNECTION DESIGN
ELBOW FIRST END
LAYER COMPOSITION AND LOCATION
1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER WRAPPED RUBBER, SYNTHETIC AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC
CONNECTION TYPE
THREADED INTERNAL TUBE FIRST END
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F3010643-8-8-8-30?
F3010643-8-8-8-30 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace F3010643-8-8-8-30?
There is 1 known substitute for F3010643-8-8-8-30: 410101-30-NSI. Substitute compatibility should be verified for your specific system.
What is the NSN for F3010643-8-8-8-30?
F3010643-8-8-8-30 is cataloged in the U.S. Government catalog under NSN 4720-01-386-3346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.