PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F3010606-8-8-8C-12.00
F3010606-8-8-8C-12.00 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The F3010606-8-8-8C-12.00 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-382-6531, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F3010606-8-8-8C-12.00
NSN: 4720-01-382-6531
FSC: 4720
CAGE: 9R376 — HYDRO-POWER INDUSTRIAL PRODUCTS INC (USA)
SPECIFICATIONS
Part NumberF3010606-8-8-8C-12.00
NSN4720-01-382-6531
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: F3010606-8-8-8C-12.00 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
TEMP RATING: -40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 7.000 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
SEAT ANGLE37.0 DEGREES FIRST END
TEMP RATING-40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS7.000 INCHES IN
BURST TEST PRESSURE11000.0 POUNDS PER SQUARE INCH LBS
INSIDE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
85474Interchangeable
interchangeable cross-reference
interchangeable
18090Interchangeable
interchangeable cross-reference
interchangeable
AD17714Interchangeable
interchangeable cross-reference
interchangeable
35902Interchangeable
interchangeable cross-reference
interchangeable
234433Interchangeable
interchangeable cross-reference
interchangeable
31-AA8-8-28IN SSInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F3010606-8-8-8C-12.00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F3010606-8-8-8C-12.00?
F3010606-8-8-8C-12.00 is a F3010606-8-8-8C-12.00.
What parts can replace F3010606-8-8-8C-12.00?
There are 9 known substitutes for F3010606-8-8-8C-12.00: 85474, 18090, AD17714 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F3010606-8-8-8C-12.00?
F3010606-8-8-8C-12.00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-382-6531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F3010606-8-8-8C-12.00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026