PartsTable
Technical Data Sheet
Download PDF

F292680 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

F292680: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.250 INCHES NOMINAL IN, outside_diameter: 0.686 INCHES NOMINAL IN, style_designator: RECESSED BOTH SIDES, top_recess_angle: 90.0 DEGREES NOMINAL, material_thickness: 0.063 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-468-9163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F292680
NSN: 5310-00-468-9163
FSC: 5310 — Nuts and Washers
CAGE: U9143 — BAE SYSTEMS (OPERATIONS) LIMITED (GBR)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.250 INCHES NOMINAL IN
outside_diameter0.686 INCHES NOMINAL IN
style_designatorRECESSED BOTH SIDES
top_recess_angle90.0 DEGREES NOMINAL
material_thickness0.063 INCHES NOMINAL IN
bottom_recess_angle90.0 DEGREES NOMINAL
top_recess_diameter0.295 INCHES NOMINAL IN
bottom_recess_diameter0.295 INCHES NOMINAL IN
NSN5310-00-468-9163
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F292680 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TOP RECESS DIAMETER: 0.295 INCHES NOMINAL IN
•
BOTTOM RECESS DIAMETER: 0.295 INCHES NOMINAL IN
•
TOP RECESS ANGLE: 90.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: RECESSED BOTH SIDES
•
OUTSIDE DIAMETER: 0.686 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
BOTTOM RECESS ANGLE: 90.0 DEGREES NOMINAL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
TOP RECESS DIAMETER0.295 INCHES NOMINAL IN
BOTTOM RECESS DIAMETER0.295 INCHES NOMINAL IN
TOP RECESS ANGLE90.0 DEGREES NOMINAL
STYLE DESIGNATORRECESSED BOTH SIDES
OUTSIDE DIAMETER0.686 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
BOTTOM RECESS ANGLE90.0 DEGREES NOMINAL
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
99-6042471Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy F292680?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F292680?
F292680 is a WASHER,RECESSED.
What parts can replace F292680?
There is 1 known substitute for F292680: 99-6042471. Substitute compatibility should be verified for your specific system.
What is the NSN for F292680?
F292680 is cataloged in the U.S. Government catalog under NSN 5310-00-468-9163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F292680