PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F29
F29 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, outside_diameter: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, cross-sectional_thickness: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-779-5747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F29
NSN: 5330-00-779-5747
FSC: 5330
CAGE: 24478 — MONNIER INC (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
outside_diameter0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
cross-sectional_thickness0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classification101 FSCM 24478 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-779-5747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: 101 FSCM 24478 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
APERTURE DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION101 FSCM 24478 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
214Interchangeable
interchangeable cross-reference
interchangeable
CN54GInterchangeable
interchangeable cross-reference
interchangeable
21029Interchangeable
interchangeable cross-reference
interchangeable
11040124-1Interchangeable
interchangeable cross-reference
interchangeable
L-F-36Interchangeable
interchangeable cross-reference
interchangeable
ANSI Z87.1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F29?
F29 is a GASKET.
What parts can replace F29?
There are 18 known substitutes for F29: 214, CN54G, 21029 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F29?
F29 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-779-5747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026