PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F2738-CO9-1,3-1,2-06

F2738-CO9-1,3-1,2-06 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,ANTIPILFERAGE is a the manufacturer industrial component. Key specifications include width: 0.3 INCHES NOMINAL IN, length: 6.0 INCHES NOMINAL IN, special_features: MANUFACTURER'S STANDARD METAL CAR/BALL END SEAL; MARK WITH LETTER "US" AND CONSECUTIVE SERIALLY NUMBERED; SELF LOCKING. This part is cataloged in the Federal Logistics Information System under NSN 5340-00-081-3381, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F2738-CO9-1,3-1,2-06
NSN: 5340-00-081-3381
FSC: 5340
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
width0.3 INCHES NOMINAL IN
length6.0 INCHES NOMINAL IN
special_featuresMANUFACTURER'S STANDARD METAL CAR/BALL END SEAL; MARK WITH LETTER "US" AND CONSECUTIVE SERIALLY NUMBERED; SELF LOCKING
NSN5340-00-081-3381
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F2738-CO9-1,3-1,2-06 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 6.0 INCHES NOMINAL IN
•
WIDTH: 0.3 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH6.0 INCHES NOMINAL IN
WIDTH0.3 INCHES NOMINAL IN
SPECIAL FEATURESMANUFACTURER'S STANDARD METAL CAR/BALL END SEAL; MARK WITH LETTER "US" AND CONSECUTIVE SERIALLY NUMBERED; SELF LOCKING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
63077-5340-4Upgraded SuccessorGOVERNMENT REGISTRY
successor cross-reference
successor
2596782Upgraded SuccessorGOVERNMENT REGISTRY
successor cross-reference
successor
FF-S-2738Upgraded SuccessorGOVERNMENT REGISTRY
successor cross-reference
successor
CXBBLA14LSRInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
XBORDER14InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
8901400 MODEL AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F2738-CO9-1,3-1,2-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F2738-CO9-1,3-1,2-06?
F2738-CO9-1,3-1,2-06 is a SEAL,ANTIPILFERAGE.
What parts can replace F2738-CO9-1,3-1,2-06?
There are 20 known substitutes for F2738-CO9-1,3-1,2-06: 63077-5340-4, 2596782, FF-S-2738 and 17 more. Substitute compatibility should be verified for your specific system.
Is F2738-CO9-1,3-1,2-06 still available?
F2738-CO9-1,3-1,2-06 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F2738-CO9-1,3-1,2-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026