PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F22X1
F22X1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.3750 INCHES NOMINAL IN, overall_width: 0.4375 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F22X1
NSN: 3110-00-108-9356
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.3750 INCHES NOMINAL IN
overall_width0.4375 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter2.5000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-108-9356
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F22X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.5000 INCHES NOMINAL IN
OVERALL WIDTH0.4375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER1.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
F2-2Interchangeable
interchangeable cross-reference
interchangeable
8514-152 2-1/2IN.M20/P120-15FTInterchangeable
interchangeable cross-reference
interchangeable
X5Interchangeable
interchangeable cross-reference
interchangeable
S1212Interchangeable
interchangeable cross-reference
interchangeable
S736/2-11Interchangeable
interchangeable cross-reference
interchangeable
ANSI B74.18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F22X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F22X1?
F22X1 is a BEARING,BALL,ANNULAR.
What parts can replace F22X1?
There are 18 known substitutes for F22X1: F2-2, 8514-152 2-1/2IN.M20/P120-15FT, X5 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F22X1?
F22X1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F22X1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026