PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F218G200
F218G200 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING HALF,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY INNER LAYER, corner_shape: SQUARE ALL CORNERS, hole_diameter: 0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM FIRST IN, overall_length: 1.3070 INCHES MINIMUM AND 1.3170 INCHES MAXIMUM IN, style_designator: HALF SLEEVE, PLAIN, NO OUTSIDE FLANGES, locking_lug_width: 0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-374-9734, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F218G200
NSN: 3120-00-374-9734
FSC: 3120
CAGE: 14351 — TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY INNER LAYER
corner_shapeSQUARE ALL CORNERS
hole_diameter0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM FIRST IN
overall_length1.3070 INCHES MINIMUM AND 1.3170 INCHES MAXIMUM IN
style_designatorHALF SLEEVE, PLAIN, NO OUTSIDE FLANGES
locking_lug_width0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
surface_treatmentTIN OVERALL
hole_spacing_angle37.0 DEGREES NOMINAL
locking_lug_height0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM IN
locking_lug_length0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM IN
body_inside_diameter2.2469 INCHES MINIMUM AND 2.2479 INCHES MAXIMUM IN
body_outside_diameter2.4375 INCHES NOMINAL IN
NSN3120-00-374-9734
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: F218G200 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: OIL LUBRICATING LUBRICATION
•
BODY OUTSIDE DIAMETER: 2.4375 INCHES NOMINAL IN
•
CORNER SHAPE: SQUARE ALL CORNERS
•
LOCKING LUG WIDTH: 0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING: 0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM FIRST IN
•
SURFACE GROOVE LOCATION AND QUANTITY: 1 INTERNAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALOIL LUBRICATING LUBRICATION
BODY OUTSIDE DIAMETER2.4375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OUTER LAYER
CORNER SHAPESQUARE ALL CORNERS
LOCKING LUG WIDTH0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM FIRST IN
MATERIALCOPPER ALLOY INNER LAYER
SURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL
LOCKING LUG HEIGHT0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM IN
DISTANCE FROM LUG END TO END OF BEARING0.2875 INCHES MINIMUM AND 0.2950 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
500QCLInterchangeable
interchangeable cross-reference
interchangeable
5000/CL(EVR)Interchangeable
interchangeable cross-reference
interchangeable
38079-0Interchangeable
interchangeable cross-reference
interchangeable
18-70-22Interchangeable
interchangeable cross-reference
interchangeable
412271MInterchangeable
interchangeable cross-reference
interchangeable
58766Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F218G200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F218G200?
F218G200 is a BEARING HALF,SLEEVE.
What parts can replace F218G200?
There are 8 known substitutes for F218G200: 500QCL, 5000/CL(EVR), 38079-0 and 5 more. Substitute compatibility should be verified for your specific system.
Is F218G200 still available?
F218G200 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F218G200

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026