PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F2152-59
F2152-59 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 2.250 INCHES NOMINAL IN, length: 6.125 INCHES NOMINAL IN, material: UNABLE TO DECODE, style_designator: FLUSH LEVER ACTUATOR, surface_treatment: UNABLE TO DECODE, bolt_offset_distance: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-670-4874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F2152-59
NSN: 5340-00-670-4874
FSC: 5340
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
width2.250 INCHES NOMINAL IN
length6.125 INCHES NOMINAL IN
materialUNABLE TO DECODE
style_designatorFLUSH LEVER ACTUATOR
surface_treatmentUNABLE TO DECODE
bolt_offset_distance0.250 INCHES NOMINAL IN
lever_offset_distance0.250 INCHES NOMINAL IN
mounting_hole_diameter0.313 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width1.625 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length1.625 INCHES NOMINAL IN
NSN5340-00-670-4874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F2152-59 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: UNABLE TO DECODE
•
WIDTH: 2.250 INCHES NOMINAL IN
•
LENGTH: 6.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
MOUNTING HOLE DIAMETER: 0.313 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
LEVER OFFSET DISTANCE: 0.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALUNABLE TO DECODE
WIDTH2.250 INCHES NOMINAL IN
LENGTH6.125 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
MOUNTING HOLE DIAMETER0.313 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
LEVER OFFSET DISTANCE0.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.625 INCHES NOMINAL IN
BOLT OFFSET DISTANCE0.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
610Upgraded Successor
successor cross-reference
successor
2528700Upgraded Successor
successor cross-reference
successor
AN225LG6600M 110/60Upgraded Successor
successor cross-reference
successor
AN225LG6600M 11Upgraded Successor
successor cross-reference
successor
23116Upgraded Successor
successor cross-reference
successor
823116Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F2152-59?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F2152-59?
F2152-59 is a CATCH,FLUSH.
What parts can replace F2152-59?
There are 7 known substitutes for F2152-59: 610, 2528700, AN225LG6600M 110/60 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F2152-59?
F2152-59 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-670-4874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F2152-59

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026