PartsTable
Technical Data Sheet
Download PDF

F1810-50K10K — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

F1810-50K10K: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 4.109 INCHES MAXIMUM IN, shaft_style: ROUND, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.500 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-824-3036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ F1810-50K10K
NSN: 5905-00-824-3036
FSC: 5905 — Resistor
CAGE: 04454 — SENSOR SYSTEMS, L.L.C. DBA SENSOR SYSTEMS LLC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length4.109 INCHES MAXIMUM IN
shaft_styleROUND
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.500 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter2.000 INCHES NOMINAL IN
pilot_diameter1.8750 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
undercut_width0.0700 INCHES MINIMUM IN
mounting_methodTHREADED HOLE(S)
section_quantity2
NSN5905-00-824-3036
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN F1810-50K10K MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 4.00 INCH-OUNCES IN
•
BODY DIAMETER: 2.000 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 50.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.0700 INCHES MINIMUM IN
•
SECTION QUANTITY: 2
•
MOUNTING FACILITY QUANTITY: 3
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE4.00 INCH-OUNCES IN
BODY DIAMETER2.000 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
UNDERCUT WIDTH0.0700 INCHES MINIMUM IN
SECTION QUANTITY2
MOUNTING FACILITY QUANTITY3
SHAFT DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER1.917 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
1810D-V24Reference document
Same NSN cross-reference
Reference document — Secondary reference
F1810Reference document
Same NSN cross-reference
Reference document — Secondary reference
PT1181Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy F1810-50K10K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F1810-50K10K?
F1810-50K10K is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace F1810-50K10K?
There are 3 known substitutes for F1810-50K10K: 1810D-V24, F1810, PT1181. Substitute compatibility should be verified for your specific system.
What is the NSN for F1810-50K10K?
F1810-50K10K is cataloged in the U.S. Government catalog under NSN 5905-00-824-3036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F1810-50K10K