PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F17515
F17515 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: POINTED, second_end_style: SQUARE, pin_overall_length: 0.470 INCHES NOMINAL IN, pin_overall_diameter: 0.1000 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-050-9602, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F17515
NSN: 5315-01-050-9602
FSC: 5315
CAGE: Z2C27 — NIOA TRADING NIOA NOMINEES PTY LIMITED DIV NIOA (AUS)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_stylePOINTED
second_end_styleSQUARE
pin_overall_length0.470 INCHES NOMINAL IN
pin_overall_diameter0.1000 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.047 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-050-9602
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F17515 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL DIAMETER: 0.1000 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 0.470 INCHES NOMINAL IN
•
SECOND END STYLE: SQUARE
•
FIRST END STYLE: POINTED
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
FIRST END TAPER LENGTH: 0.047 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
PIN OVERALL DIAMETER0.1000 INCHES NOMINAL IN
PIN OVERALL LENGTH0.470 INCHES NOMINAL IN
SECOND END STYLESQUARE
FIRST END STYLEPOINTED
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FIRST END TAPER LENGTH0.047 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
GK6845BInterchangeable
interchangeable cross-reference
interchangeable
6205-2ZJTEInterchangeable
interchangeable cross-reference
interchangeable
06771DD0FInterchangeable
interchangeable cross-reference
interchangeable
716-105366Interchangeable
interchangeable cross-reference
interchangeable
53-10008Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F17515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F17515?
F17515 is a PIN,STRAIGHT,HEADLESS.
What parts can replace F17515?
There are 10 known substitutes for F17515: GK6845B, 6205-2ZJTE, 06771DD0F and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F17515?
F17515 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-050-9602. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F17515

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026