PartsTable
Technical Data Sheet
Download PDF

F163628 — PLUG,VENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

F163628: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.775 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, thread_length: 1.312 INCHES NOMINAL IN, outside_diameter: 1.000 INCHES NOMINAL IN, special_features: C5 HEX, end_connection_type: THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-643-8069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F163628
NSN: 5340-01-643-8069
FSC: 5340 — Hardware, Commercial
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
length0.775 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
thread_length1.312 INCHES NOMINAL IN
outside_diameter1.000 INCHES NOMINAL IN
special_featuresC5 HEX
end_connection_typeTHREADED
end_item_identificationMANIFOLD ASSEMBLY
thread_size_and_series/type_designator12 UN
NSN5340-01-643-8069
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F163628 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.775 INCHES NOMINAL IN
•
THREAD LENGTH: 1.312 INCHES NOMINAL IN
•
END CONNECTION TYPE: THREADED
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 12 UN
TECHNICAL CHARACTERISTICS
LENGTH0.775 INCHES NOMINAL IN
THREAD LENGTH1.312 INCHES NOMINAL IN
END CONNECTION TYPETHREADED
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
SPECIAL FEATURESC5 HEX
END ITEM IDENTIFICATIONMANIFOLD ASSEMBLY
MATERIALSTEEL CORROSION RESISTING
THREAD SIZE AND SERIES/TYPE DESIGNATOR12 UN
SUBSTITUTES & CROSS-REFERENCES 2
7526221Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
F162233 REV - ITEM NO.16Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy F163628?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F163628?
F163628 is a PLUG,VENT.
What parts can replace F163628?
There are 2 known substitutes for F163628: 7526221, F162233 REV - ITEM NO.16. Substitute compatibility should be verified for your specific system.
What is the NSN for F163628?
F163628 is cataloged in the U.S. Government catalog under NSN 5340-01-643-8069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F163628

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.