PartsTable
Technical Data Sheet
Download PDF

F163488 — PLUG,VENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

F163488: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.560 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, outside_diameter: 0.500 INCHES NOMINAL IN, special_features: 0.375 HEX SOCKET PLUG, end_connection_type: THREADED, end_item_identification: HPU ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-644-2944, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F163488
NSN: 5340-01-644-2944
FSC: 5340 — Hardware, Commercial
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
length0.560 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
outside_diameter0.500 INCHES NOMINAL IN
special_features0.375 HEX SOCKET PLUG
end_connection_typeTHREADED
end_item_identificationHPU ASSEMBLY
thread_size_and_series/type_designatorTPI 14 NPTF
NSN5340-01-644-2944
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F163488 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.560 INCHES NOMINAL IN
•
END CONNECTION TYPE: THREADED
•
OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: TPI 14 NPTF
TECHNICAL CHARACTERISTICS
LENGTH0.560 INCHES NOMINAL IN
END CONNECTION TYPETHREADED
OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
SPECIAL FEATURES0.375 HEX SOCKET PLUG
END ITEM IDENTIFICATIONHPU ASSEMBLY
MATERIALSTEEL CORROSION RESISTING
THREAD SIZE AND SERIES/TYPE DESIGNATORTPI 14 NPTF
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
4452K544Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
F143203 REV J ITEM NO50Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy F163488?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F163488?
F163488 is a PLUG,VENT.
What parts can replace F163488?
There are 2 known substitutes for F163488: 4452K544, F143203 REV J ITEM NO50. Substitute compatibility should be verified for your specific system.
What is the NSN for F163488?
F163488 is cataloged in the U.S. Government catalog under NSN 5340-01-644-2944. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F163488