PartsTable
Technical Data Sheet
Download PDF

F160248 ITEM 2 — BEARING,ROLLER,SELF-ALIGNING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

F160248 ITEM 2: BEARING,ROLLER,SELF-ALIGNING.

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 85.0 MILLIMETERS NOMINAL MM, overall_width: 60.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, special_features: P/N:22317E HAS BEEN SUPERSEEDED BY P/N:22317EK,PER OEM.. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-646-6406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F160248 ITEM 2
NSN: 3110-01-646-6406
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter85.0 MILLIMETERS NOMINAL MM
overall_width60.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
special_featuresP/N:22317E HAS BEEN SUPERSEEDED BY P/N:22317EK,PER OEM.
style_designatorDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
end_item_identificationBOOM DRIVE
overall_outside_diameter180.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
part_name_assigned_by_controlling_agencySPHERICAL ROLLER BEARING
NSN3110-01-646-6406
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F160248 ITEM 2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: DOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 180.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
OVERALL WIDTH60.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER180.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
SPECIAL FEATURESP/N:22317E HAS BEEN SUPERSEEDED BY P/N:22317EK,PER OEM.
PART NAME ASSIGNED BY CONTROLLING AGENCYSPHERICAL ROLLER BEARING
END ITEM IDENTIFICATIONBOOM DRIVE
BORE DIAMETER85.0 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 1
22317EReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy F160248 ITEM 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F160248 ITEM 2?
F160248 ITEM 2 is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace F160248 ITEM 2?
There is 1 known substitute for F160248 ITEM 2: 22317E. Substitute compatibility should be verified for your specific system.
What is the NSN for F160248 ITEM 2?
F160248 ITEM 2 is cataloged in the U.S. Government catalog under NSN 3110-01-646-6406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F160248 ITEM 2