PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F14X1
F14X1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_width: 0.3750 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, overall_outside_diameter: 1.8750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F14X1
NSN: 3110-00-108-9348
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter0.8750 INCHES NOMINAL IN
overall_width0.3750 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
overall_outside_diameter1.8750 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-108-9348
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F14X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
OVERALL OUTSIDE DIAMETER: 1.8750 INCHES NOMINAL IN
•
BORE DIAMETER: 0.8750 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONRADIAL
OVERALL WIDTH0.3750 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
OVERALL OUTSIDE DIAMETER1.8750 INCHES NOMINAL IN
BORE DIAMETER0.8750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
891410Interchangeable
interchangeable cross-reference
interchangeable
891410REVEInterchangeable
interchangeable cross-reference
interchangeable
DWG5120-00-144-2084Interchangeable
interchangeable cross-reference
interchangeable
51201442084Interchangeable
interchangeable cross-reference
interchangeable
1014Interchangeable
interchangeable cross-reference
interchangeable
F14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F14X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F14X1?
F14X1 is a BEARING,BALL,ANNULAR.
What parts can replace F14X1?
There are 26 known substitutes for F14X1: 891410, 891410REVE, DWG5120-00-144-2084 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F14X1?
F14X1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9348. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F14X1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026