PartsTable
Technical Data Sheet
Download PDF

F12N7699-820 — NUT,SELF-LOCKING,ASSEMBLED WASHE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

F12N7699-820: NUT,SELF-LOCKING,ASSEMBLED WASHE.

NUT,SELF-LOCKING,ASSEMBLED WASHE. Key specifications include material: PLASTIC NYLON LOCKING INSERT, nut_style: FLAT WITH TURNED BACK EDGE, temp_rating: 250.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), overall_height: 0.536 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-004-5119, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F12N7699-820
NSN: 5310-00-004-5119
FSC: 5310 — Nuts and Washers
CAGE: 27687 — GREER STOP NUT, INC. (USA)
SPECIFICATIONS
materialPLASTIC NYLON LOCKING INSERT
nut_styleFLAT WITH TURNED BACK EDGE
temp_rating250.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.536 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCHROMATE WASHER
width_across_flats0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
counterbore_diameter0.604 INCHES MINIMUM AND 0.614 INCHES MAXIMUM NUT IN
NSN5310-00-004-5119
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F12N7699-820 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.895 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE WASHER
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 250.0 FAHRENHEIT MAXIMUM DEGF
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.536 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.895 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING250.0 FAHRENHEIT MAXIMUM DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/13,T6 FED SPEC 2ND MATERIAL RESPONSE WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5024 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5020 ASSN STD 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6323 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6325 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6327 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6358 ASSN STD 3RD MATERIAL RESPONSE NUT
SUBSTITUTES & CROSS-REFERENCES 3
5310PL1034512Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS21224-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
NE8235-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy F12N7699-820?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F12N7699-820?
F12N7699-820 is a NUT,SELF-LOCKING,ASSEMBLED WASHE.
What parts can replace F12N7699-820?
There are 3 known substitutes for F12N7699-820: 5310PL1034512, MS21224-8, NE8235-8. Substitute compatibility should be verified for your specific system.
What is the NSN for F12N7699-820?
F12N7699-820 is cataloged in the U.S. Government catalog under NSN 5310-00-004-5119. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F12N7699-820

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.