PartsTable
Technical Data Sheet
Download PDF

F116F4S — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

F116F4S: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, flange_width: 0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM IN, bore_diameter: 0.2500 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-975-0016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F116F4S
NSN: 3110-00-975-0016
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 72314 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
flange_width0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM IN
bore_diameter0.2500 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
inner_ring_width0.2490 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
outer_ring_width0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
flange_outside_diameter0.6850 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM IN
NSN3110-00-975-0016
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F116F4S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
FLANGE OUTSIDE DIAMETER: 0.6850 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
FLANGE OUTSIDE DIAMETER0.6850 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy F116F4S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F116F4S?
F116F4S is a BEARING,BALL,ANNULAR.
What is the NSN for F116F4S?
F116F4S is cataloged in the U.S. Government catalog under NSN 3110-00-975-0016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F116F4S