PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F114-50-9
F114-50-9 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CORROSION RESISTING OVERALL, pin_taper: 0.246 PER FOOT IN INCHES, first_end_style: OVAL, first_end_location: BOTH ENDS, pin_overall_length: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, pin_size_designation: 5/0. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-821-9776, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F114-50-9
NSN: 5315-00-821-9776
FSC: 5315
CAGE: 72314 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
pin_taper0.246 PER FOOT IN INCHES
first_end_styleOVAL
first_end_locationBOTH ENDS
pin_overall_length0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
pin_size_designation5/0
first_end_outer_radius0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-821-9776
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F114-50-9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
PIN OVERALL LENGTH: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
•
PIN SIZE DESIGNATION: 5/0
•
FIRST END OUTER RADIUS: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
PIN TAPER: 0.246 PER FOOT IN INCHES
•
FIRST END STYLE: OVAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END LOCATIONBOTH ENDS
MATERIALSTEEL CORROSION RESISTING OVERALL
PIN OVERALL LENGTH0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
PIN SIZE DESIGNATION5/0
FIRST END OUTER RADIUS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
PIN TAPER0.246 PER FOOT IN INCHES
FIRST END STYLEOVAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
106814C1Interchangeable
interchangeable cross-reference
interchangeable
C-25Interchangeable
interchangeable cross-reference
interchangeable
602-51-104Interchangeable
interchangeable cross-reference
interchangeable
2940001419026Interchangeable
interchangeable cross-reference
interchangeable
83317CSInterchangeable
interchangeable cross-reference
interchangeable
7108842-007Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F114-50-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F114-50-9?
F114-50-9 is a PIN,TAPERED,PLAIN.
What parts can replace F114-50-9?
There are 28 known substitutes for F114-50-9: 106814C1, C-25, 602-51-104 and 25 more. Substitute compatibility should be verified for your specific system.
Is F114-50-9 still available?
F114-50-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F114-50-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026