PartsTable
Technical Data Sheet
Download PDF

F108 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

F108: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL, body_width: 0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN, head_style: HEXAGON, body_length: 2.000 INCHES NOMINAL IN, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-269-2803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ F108
NSN: 5305-00-269-2803
NIINs: 002692803, 011354863, 013197599, 013849846
FSC: 5305 — Screws
CAGE: 00365 — TLD ACE CORP DIV TLD ACE (USA)
SPECIFICATIONS
materialSTEEL
body_width0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN
head_styleHEXAGON
body_length2.000 INCHES NOMINAL IN
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
terminal_typeTAB, SOLDER LUGTAB, SOLDER LUG
thread_length0.866 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
inclosure_typeENCAPSULATEDENCAPSULATED
overall_length0.950 INCHES NOMINAL IN
terminal_width0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
fastener_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NSN5305-00-269-2803
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: F108 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.866 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.866 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
251575Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90726-60GSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
186627Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5305002692803Reference document
Same NSN cross-reference
Reference document — Informative reference only
65A0542-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
70008-60Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy F108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F108?
F108 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace F108?
There are 10 known substitutes for F108: 251575, MS90726-60G, 186627 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F108?
F108 is cataloged in the U.S. Government catalog under NSN 5305-00-269-2803. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F108

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.