PartsTable
Technical Data Sheet
Download PDF

F10419-0488 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

F10419-0488: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN, center_hole_diameter: 0.813 INCHES NOMINAL IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-009-0054, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F10419-0488
NSN: 5330-01-009-0054
FSC: 5330 — Packing and Gasket Materials
CAGE: F0192 — FLOWSERVE SIHI (FRANCE) SAS (FRA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
center_hole_diameter0.813 INCHES NOMINAL IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.135 INCHES NOMINAL IN
cross-sectional_shape_styleO-RING
cross_section_outside_diameter0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
material_document_and_classificationMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-009-0054
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F10419-0488 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
PERIPHERAL DIAMETER: 1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.813 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
ELONGATION PERCENTAGE331 MAXIMUM
PERIPHERAL DIAMETER1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.813 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
2-211N304-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN6227B16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N0674 2-211Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-211 N674-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
N0304 2-211Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy F10419-0488?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F10419-0488?
F10419-0488 is a PACKING,PREFORMED.
What parts can replace F10419-0488?
There are 5 known substitutes for F10419-0488: 2-211N304-75, AN6227B16, N0674 2-211 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F10419-0488?
F10419-0488 is cataloged in the U.S. Government catalog under NSN 5330-01-009-0054. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F10419-0488

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.