PartsTable
Technical Data Sheet
Download PDF

F08-0114C-02TY — VALVE,CHECK

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

F08-0114C-02TY: VALVE,CHECK.

The VALVE,CHECK is a the manufacturer industrial component. Key specifications include material: STEEL STEM, valve_size: 2.000 INCHES IN, flange_shape: ROUND WITH HOLES ALL ENDS, connection_type: FLANGE ALL ENDS, special_features: SWING TYPE, style_designator: STRAIGHT THRU FLANGED ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-421-4697, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F08-0114C-02TY
NSN: 4820-01-421-4697
FSC: 4820 — Valves, Nonpowered
CAGE: 57574 — VELAN VALVE CORP. (USA)
SPECIFICATIONS
materialSTEEL STEM
valve_size2.000 INCHES IN
flange_shapeROUND WITH HOLES ALL ENDS
connection_typeFLANGE ALL ENDS
special_featuresSWING TYPE
style_designatorSTRAIGHT THRU FLANGED ENDS
mounting_positionVERTICAL
nominal_thickness0.625 INCHES ALL ENDS IN
bolt_hole_quantity4 ALL ENDS
flange_face_designRAISED STRAIGHT ALL ENDS
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
NSN4820-01-421-4697
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: F08-0114C-02TY · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
FLANGE SHAPE: ROUND WITH HOLES ALL ENDS
•
FLANGE FACE DESIGN: RAISED STRAIGHT ALL ENDS
•
BOLT CIRCLE NOMINAL DIAMETER: 4.750 INCHES ALL ENDS IN
•
MOUNTING POSITION: VERTICAL
•
CONNECTION TYPE: FLANGE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU FLANGED ENDS
•
BOLT HOLE NOMINAL DIAMETER: 0.750 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
FLANGE SHAPEROUND WITH HOLES ALL ENDS
FLANGE FACE DESIGNRAISED STRAIGHT ALL ENDS
BOLT CIRCLE NOMINAL DIAMETER4.750 INCHES ALL ENDS IN
MOUNTING POSITIONVERTICAL
CONNECTION TYPEFLANGE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU FLANGED ENDS
BOLT HOLE NOMINAL DIAMETER0.750 INCHES ALL ENDS IN
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VALVE SIZE2.000 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
3F-0114C-02TY-00Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy F08-0114C-02TY?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F08-0114C-02TY?
F08-0114C-02TY is a VALVE,CHECK.
What parts can replace F08-0114C-02TY?
There is 1 known substitute for F08-0114C-02TY: 3F-0114C-02TY-00. Substitute compatibility should be verified for your specific system.
What is the NSN for F08-0114C-02TY?
F08-0114C-02TY is cataloged in the U.S. Government catalog under NSN 4820-01-421-4697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F08-0114C-02TY

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.