PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F0450-008
F0450-008 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, surface_finish: 63.0 MICROINCHES LARGE END, first_end_style: CHAMFERED, second_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-488-1177, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F0450-008
NSN: 5315-00-488-1177
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
surface_finish63.0 MICROINCHES LARGE END
first_end_styleCHAMFERED
second_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
pin_overall_diameter0.0424 INCHES MINIMUM AND 0.0427 INCHES MAXIMUM IN
first_end_taper_angle42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM
first_end_taper_length0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
second_end_taper_angle2.0 DEGREES MINIMUM AND 8.0 DEGREES MAXIMUM
second_end_taper_length0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-488-1177
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F0450-008 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SECOND END TAPER LENGTH: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
•
SURFACE FINISH: 16.0 MICROINCHES OUTSIDE DIAMETER
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SECOND END TAPER LENGTH0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
SURFACE FINISH16.0 MICROINCHES OUTSIDE DIAMETER
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END TAPER ANGLE2.0 DEGREES MINIMUM AND 8.0 DEGREES MAXIMUM
SURFACE FINISH63.0 MICROINCHES LARGE END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
GGG-H-86 TY2CL1STBInterchangeable
interchangeable cross-reference
interchangeable
GGG-H-86Interchangeable
interchangeable cross-reference
interchangeable
HEYCO 1522Interchangeable
interchangeable cross-reference
interchangeable
0450-8Interchangeable
Same NIIN cross-reference
interchangeable
0450-008Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F0450-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F0450-008?
F0450-008 is a PIN,STRAIGHT,HEADLESS.
What parts can replace F0450-008?
There are 5 known substitutes for F0450-008: GGG-H-86 TY2CL1STB, GGG-H-86, HEYCO 1522 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F0450-008?
F0450-008 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-488-1177. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F0450-008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026