PartsTable
Technical Data Sheet
Download PDF

F026 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

F026: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 1.4060 INCHES MINIMUM AND 1.4065 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 1.2160 INCHES MINIMUM AND 1.2360 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-157-1900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F026
NSN: 3110-00-157-1900
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter1.4060 INCHES MINIMUM AND 1.4065 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MINIMUM
overall_width1.2160 INCHES MINIMUM AND 1.2360 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
inner_ring_width0.9170 INCHES NOMINAL IN
outer_ring_width0.8510 INCHES NOMINAL IN
special_featuresOUTER AND INNER RINGS COUNTERBORED
style_designatorFRONT WHEEL, RADIAL AND THRUST, SEPARABLE
overall_outside_diameter3.1491 INCHES MINIMUM AND 3.1501 INCHES MAXIMUM IN
NSN3110-00-157-1900
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F026 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.8510 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: FRONT WHEEL, RADIAL AND THRUST, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 3.1491 INCHES MINIMUM AND 3.1501 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.8510 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORFRONT WHEEL, RADIAL AND THRUST, SEPARABLE
OVERALL WIDTH1.2160 INCHES MINIMUM AND 1.2360 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER3.1491 INCHES MINIMUM AND 3.1501 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MINIMUM
LOAD DIRECTIONANGULAR
SPECIAL FEATURESOUTER AND INNER RINGS COUNTERBORED
SUBSTITUTES & CROSS-REFERENCES 1
909026Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy F026?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F026?
F026 is a BEARING,BALL,ANNULAR.
What parts can replace F026?
There is 1 known substitute for F026: 909026. Substitute compatibility should be verified for your specific system.
What is the NSN for F026?
F026 is cataloged in the U.S. Government catalog under NSN 3110-00-157-1900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F026

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.