PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F-60-QO 2IN ITEM11 NON-ASBESTOS
F-60-QO 2IN ITEM11 NON-ASBESTOS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include outside_diameter: 2.922 INCHES NOMINAL IN, special_features: NON-ASBESTOS MATERIAL, aperture_diameter: 2.375 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-408-0992, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F-60-QO 2IN ITEM11 NON-ASBESTOS
NSN: 5330-01-408-0992
FSC: 5330
CAGE: 62650 — FLOWORKS USA LP DBA FLOTECH DIV JACKSONVILLE (USA)
SPECIFICATIONS
outside_diameter2.922 INCHES NOMINAL IN
special_featuresNON-ASBESTOS MATERIAL
aperture_diameter2.375 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
NSN5330-01-408-0992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F-60-QO 2IN ITEM11 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.922 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.922 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
APERTURE DIAMETER2.375 INCHES NOMINAL IN
SPECIAL FEATURESNON-ASBESTOS MATERIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
SNJ54ALS832JInterchangeable
interchangeable cross-reference
interchangeable
84145Interchangeable
interchangeable cross-reference
interchangeable
8414501RXInterchangeable
interchangeable cross-reference
interchangeable
FC-14Interchangeable
interchangeable cross-reference
interchangeable
84145 220VAC 1P H 50HZInterchangeable
interchangeable cross-reference
interchangeable
84145-1PBInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F-60-QO 2IN ITEM11 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F-60-QO 2IN ITEM11 NON-ASBESTOS?
F-60-QO 2IN ITEM11 NON-ASBESTOS is a GASKET,SPIRAL WOUND.
What parts can replace F-60-QO 2IN ITEM11 NON-ASBESTOS?
There are 7 known substitutes for F-60-QO 2IN ITEM11 NON-ASBESTOS: SNJ54ALS832J, 84145, 8414501RX and 4 more. Substitute compatibility should be verified for your specific system.
Is F-60-QO 2IN ITEM11 NON-ASBESTOS still available?
F-60-QO 2IN ITEM11 NON-ASBESTOS is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F-60-QO 2IN ITEM11 NON-ASBESTOS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026