PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F-330 AND F-464
F-330 AND F-464 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, outer_groove_depth: 0.112 INCHES NOMINAL IN, outer_groove_width: 0.188 INCHES NOMINAL IN, peripheral_diameter: 1.340 INCHES MINIMUM AND 1.345 INCHES MAXIMUM IN, center_hole_diameter: 0.191 INCHES NOMINAL IN, cross-sectional_height: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-712-0129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F-330 AND F-464
NSN: 5330-00-712-0129
FSC: 5330
CAGE: 82484 — CVG SPRAGUE DEVICES, LLC DBA CVG SPRAGUE DEVICES, LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
outer_groove_depth0.112 INCHES NOMINAL IN
outer_groove_width0.188 INCHES NOMINAL IN
peripheral_diameter1.340 INCHES MINIMUM AND 1.345 INCHES MAXIMUM IN
center_hole_diameter0.191 INCHES NOMINAL IN
cross-sectional_height0.312 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-712-0129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F-330 AND F-464 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.340 INCHES MINIMUM AND 1.345 INCHES MAXIMUM IN
•
OUTER GROOVE WIDTH: 0.188 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
OUTER GROOVE DEPTH: 0.112 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.191 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.340 INCHES MINIMUM AND 1.345 INCHES MAXIMUM IN
OUTER GROOVE WIDTH0.188 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY OVERALL
OUTER GROOVE DEPTH0.112 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.191 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
F211Interchangeable
interchangeable cross-reference
interchangeable
G4116-001Interchangeable
interchangeable cross-reference
interchangeable
4116Interchangeable
Intel Silver Xeon 4116 (12 Core) 2.10 GHz
interchangeable
50171PC70Interchangeable
interchangeable cross-reference
interchangeable
9198200-1Interchangeable
interchangeable cross-reference
interchangeable
ST161Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F-330 AND F-464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F-330 AND F-464?
F-330 AND F-464 is a RETAINER,PACKING.
What parts can replace F-330 AND F-464?
There are 8 known substitutes for F-330 AND F-464: F211, G4116-001, 4116 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F-330 AND F-464?
F-330 AND F-464 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-712-0129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F-330 AND F-464

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026