PartsTable
Technical Data Sheet
PartsTable / MRO / F-175-90
F-175-90 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, flange_width: 0.0469 INCHES NOMINAL IN, bore_diameter: 0.3750 INCHES MINIMUM AND 0.3790 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: UNGROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-124-3127, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ F-175-90
NSN: 3110-01-124-3127
FSC: 3110
CAGE: 75277 — KILIAN MANUFACTURING CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
flange_width0.0469 INCHES NOMINAL IN
bore_diameter0.3750 INCHES MINIMUM AND 0.3790 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishUNGROUND
inner_ring_width0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
outer_ring_width0.3095 INCHES MINIMUM AND 0.3155 INCHES MAXIMUM IN
special_featuresTWO PIECE INNER RING,FULL COMPLIMENT OF BALLS
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
flange_outside_diameter1.0000 INCHES NOMINAL IN
outer_ring_outside_diameter0.9042 INCHES MINIMUM AND 0.9082 INCHES MAXIMUM IN
NSN3110-01-124-3127
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F-175-90 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: UNGROUND
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3790 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
FLANGE OUTSIDE DIAMETER: 1.0000 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHUNGROUND
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE DIAMETER0.3750 INCHES MINIMUM AND 0.3790 INCHES MAXIMUM IN
SPECIAL FEATURESTWO PIECE INNER RING,FULL COMPLIMENT OF BALLS
LOAD DIRECTIONRADIAL
FLANGE OUTSIDE DIAMETER1.0000 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
OUTER RING OUTSIDE DIAMETER0.9042 INCHES MINIMUM AND 0.9082 INCHES MAXIMUM IN
FLANGE WIDTH0.0469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
R8210G1001-1Interchangeable
interchangeable cross-reference
interchangeable
05-0200-1Interchangeable
interchangeable cross-reference
interchangeable
4INB30AJMInterchangeable
interchangeable cross-reference
interchangeable
6848982Interchangeable
interchangeable cross-reference
interchangeable
RF14724Interchangeable
interchangeable cross-reference
interchangeable
F17590Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F-175-90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F-175-90?
F-175-90 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace F-175-90?
There are 7 known substitutes for F-175-90: R8210G1001-1, 05-0200-1, 4INB30AJM and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F-175-90?
F-175-90 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-124-3127. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F-175-90

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026